HDPE Ducts for Telecom

Micro Duct Ø 3/1.5, 5/3.5, 7/5.5, 8/4.4, 10/5.5, 10/7.6, 10/8, 12/8, 12/10, 14/10, 16/10 mm OD/ID/p>
OFC Duct 29/23, 32/26, 32/27, 32/28, 40/33, 40/34.2, 50/42, 50/43 mm OD/ID
Spirozoom 38.8 mm, 40/34.2 & 40/33 mm
Multi-Micro Duct 2 way to 8 way
Standards BSNL (TEC) Specifi cation, Company Specifi cation GR No. TEC/GR/TX/CDS- 008/03/MAR-11
Length Available in Coils & Drums
Material Grades PE-63 & PE-80 in different colours

The purpose of HDPE duct is to provide a clear, protected pathway for a cable, or for smaller conduits. The HDPE cable ducts are manufactured for mechanical protection to fibre optic, electrical cables etc. Basically HDPE ducts are used for installations of local and long-distance telephone networks, cable television transmissions, information transfer networks, etc. HDPE ducts are manufactured from high quality HDPE material and co-extruded with special lubricant providing a low friction smooth surface for easy cable drawing/blowing. The outer HDPE shell makes the pipe more tough and durable and enables the duct to withstand the pressure during high speed air blowing of cable as well as retain the roundness under soil pressure and traffic load. HDPE ducts can also be supplied with inner lubricated area in ribbed form. HDPE anti rodent ducts provide best solution to rodent attack by incorporating a bitterent in the pipe to dissuade rodents from gnawing it.

Applications

Optical Fiber Cable (OFC) Ducting forTelecom & Data Networks
Fiber To The Home (FTTH) application

Features

Concentric layers of tough HOPE outer Shell co-extruded with an inner layer of solid special lubricant having low co-efficient of friction.
Low co-efficient of friction ensures easy, safe and fast installation of OFC by High Speed Air Blowing without damage to duct. Can withstand blowing pressure of 140 to 150 psi. Cables can be removed and reblown number of times. Also ensures accurate installation and measurement.
Available in Blue, Orange, Green, Pink, Yellow, Red, Brown, Purple, Grey and Black Colours. Other colours on demand.
Easy identification of cables installed.
Available in coils of 250,500 and 1000 meters.
Coils of 2000 and 3000 metres & duct wound on wooden/steel drums can be made available.
Up to 4 different colour coils of 1000 metres ducts wound on steel drums can be supplied.
Duct up to 110 mm dia can be supplied in coils.
Reduces both the number of joints in the network & the cost of installation and time.
Ducts with pre-inserted rope for pulling OFC cable available on demand.
Provides an alternative to High Speed Air Blowing of cable when equipment and expertise not available with the provider.
Pressurized Duct coils with air pressure up to 1 kg/cm² is available.
Duct coils are supplied with end seals.
The end seals prevent dirt, soil, reptiles & other creatures entering the duct during duct laying and safe guards duct till cable blowing.
Requisite accessories like Push-Fit Coupler, End Plug, Cable Sealing Plug, Duct Cutter, Spanner, Duct Spacer, Duct / cable - Tie, De-coilers etc are available. Blowing of cables can be undertaken on request.
One-Stop-Shop availability.